The KENSINGTON Series

The Kensington Series is designed for post frame building.  This series attaches to pre-installed post and stall front wood (2” x 6” or 2” x 8” kiln dried wood) or concrete wall.  Stall doors, fronts and partitions include choice of powder coating colors.  Each stall front is standard 48” wide and 83” tall at the ends.  Kensington standard bullet hinged stall door is 59” tall and manufactured for 48” wide opening with a 2” x 3” door jamb mounted to center posts on each with a welded sleeve to receive the spring latch locking mechanism.  Heritage Equine Equipment can also provide powder coated steel posts.

Stall Doors, Fronts and Partitions are manufactured from 14 gauge galvanized steel.  All of the Kensington Series fronts and partitions are constructed with 2” square tube frame on bottom and 1.90” round tubing on top with 1” round bars set 3” on center.
​
Kensington stall doors are constructed with 2” square tubing and 1” round bars set 3” on center.  Standard u-channel frame accepts standard grade kiln dried construction lumber (see above).  Locking mechanisms include a spring latch that latches into 2” x 3” angle door frame.

Stall door can also be configured with horizontal, vertical or Horizontal/Vertical/ Horizontal wood fill or name plate, grilled center and shavings guard. Mesh fill is also available.

Kensington Curved Stall Front, Hinged Grilled Stall Door with Name Plate & Shavings Guard & Windsor Stall Partitions.